What are the common wiring methods of outdoor LED lighting

2022-12-08

Outdoor LED lighting wiring first consider the use of the environment, outdoor to consider many factors, waterproof and dustproof, high temperature resistance, aging resistance, etc.. Cable wiring is not well protected, in the use of the situation may occur a lot of safety accidents, so under normal circumstances will do a good job of protective measures.

Most of our high-power LED floodlights are used in a variety of outdoor environments, such as under trees in the gardening, bushes and poolside so we are in these damp and sun and rain in the harsh environment how to protect the waterproof outdoor LED floodlight LED lamps wiring? First of all, the standard protection level of our lamps and lanterns is IP65-IP68, that is, the lamps and lanterns with dustproof and rainproof function, but can not reach the level of immersion in water, so we must pay attention to the installation, then the exposed wiring we are generally in the field directly with the main line butt, lamps and lanterns lead wire is about 30-50cm long, and the main line connector connection after how to protect the waterproof and leakage, our engineering The solutions are:

1, Cai Rui line pipe threading and then wiring position to install waterproof junction box wire head in the junction box so that you can play a double protection.

2, a simple way is to use insulation tape in the wiring joints first of all to wrap the joints and then use waterproof tape wrapping and then wrap a layer of insulation tape so that the general situation in the outdoor waterproof completely reliable;

3, the use of professional waterproof wiring connectors, connectors and then tightened at both ends of the connector, the general waterproof connector protection level can also reach IP67 or more.

led line light general voltage for AC220V, DC12V, DC24V three, so you need to choose the right switching power supply, the size of the power supply according to the power and connection length of the LED strip to determine. It should be noted that DC12V and DC24V should not be connected to AC220V, otherwise all the lamp beads will be burned. DC12V should not be connected to DC24V control power; otherwise the power will be doubled and the lamp beads will be easily burned. 4 wires are generally used to distinguish between black, red, green and blue. The seven-color light strips are generally co-anode, that is, one of the light strips above is +12V connected to the black line, the others are negative, RGB access to the corresponding red, green and blue interface or power line.

Recommended news

What is the meaning of led light what use

1, LED is a - a semiconductor diode that can convert electrical energy into light energy. LED and general diodes, like PN junctions, is also a one-way conductive. After the forward current is applied to the light-emitting di_ tube, will be injected from the P region into the N region of holes and N region into the P region of electrons, in the PN node around a few microns, respectively, with the N region of electrons and P region of holes were compounded, thus forming a spontaneous fluorescence. In different semiconductor materials, electrons and holes are in different energy states.

12-08

2022

Do you know all the ten advantages of LED lighting?

Do you know all the ten advantages of LED lighting? Shangzheng Lighting main products are led factory lights, led court lights, led tower crane lights, led road tunnel lights, etc. We can provide customers with pre-sales, sales and after-sales integrated solutions. Our products are widely used in outdoor lighting, urban road lighting, tunnel lighting, industrial plant lighting, large site dock lighting and other fields.

12-08

2022

High power LED lamp heat dissipation performance factors

LED lights have features such as energy saving and environmental protection, but the actual operation process is easy to generate a lot of heat, once the heat can not be discharged, it is easy to have a high temperature resulting in abnormal chip heat, light source decline and reduced lamp life, etc. In simple terms, the LED lamp thermal management structure is mainly chip-level sealing, packaging level and system integration thermal level.

12-08

2022